Zelda 1 Overworld pixel map
Based on the great map modeled by DarkApollo https://www.thingiverse.com/thing:2138498
STL Files
I fixed a bunch of STL files and uploaded them to Github: https://github.com/andres-torres-marroquin/zelda-overworld-pixel-map
Still Slic3r fails to slice them correctly, I used Slic3r Prusa Edition, it works much better and faster.
Filaments Used
It weights roughly 500 grams worth of filament. I printed them on different materials, using the M600 color change on gcode, so no painting was required. (I’m too lazy for that lol)
- Gizmo Dorks Beige 1.75mm PLA
- Gizmo Dorks Blue 1.75mm PLA
- Hatchbox Green 1.75mm PLA
- Hatchbox White 1.75mm PLA
- Hatchbox Gray 1.75mm PLA
- Filamentum Extrafill Signal Brown 1.75mm PLA
How to M600 Properly (WIP)
Examples to understand this guide, remember that the first layer is commonly 0.2mm:
- Printing E7 at 0.2mm resolution - 10 layers (0.2mm-2.0mm) are beige, then 2.2mm to end a are green.
- Printing E7 at 0.15mm resolution - 13 layers (0.2mm-2.0mm) are beige, then 2.2mm to end are green.
- Printing E7 at 0.1mm resolution - 20 layers (0.2mm-2.0mm) are beige, then 2.2mm to end are green.
Beige 0.0mm to 2.0mm - Green 2.0mm to end (26 pieces)
- E7 E8
- G7 G8
- H6 H7 H8
- I6 I7 I8
- J5
- K5
- L5 L6 L7
- M4 M5 M6 M7
- N4 N5 N6 N7
- O5 O6 O7
Blue 0.0mm to 1.0mm - Beige 1.0mm to 2.0mm - Green 2.0mm to end (12 pieces)
- E6
- F6 F7 F8
- G5 G6
- H5
- I5
- J6 J7
- K6 K7
Beige 0.0mm to 2.0mm - Brown 2.0mm to end (25 pieces)
- A7 A8
- B6 B7 B8
- C2 C6 C7 C8
- D2 D6 D7 D8
- E2
- F2
- G2
- J3 J8
- K3 K4 K8
- L3 L4
- M3
- P2
Blue 0.0mm to 1.0mm - Beige 1.0mm to 2.0mm - Brown 2.0mm to end (27 pieces)
- C5
- D5
- E4 E5
- F4 F5
- G3 G4
- H2 H3 H4
- I3 I4
- J4
- L8
- M8
- N3 N8
- O2 O3 O4 O8
- P4 P5 P6 P7 P8
Gray 0.0mm to 2.0mm - White 2.0mm to end (1 pieces)
- A6
Gray 0.0mm to 10.0mm - White 10.0mm to end (6 pieces)
- A3 A4 A5
- B3 B4 B5
Blue 0.0mm to 1.0mm - Gray 1.0mm to 2.0mm - White 2.0mm to end (1 pieces)
- P3
Brown 0.0mm to 9.0mm - Beige 9.0mm to 10.0mm - Brown 10.0mm to end (4 pieces)
- A2
- B2
- E3
- F4
Brown 0.0mm to 17.0mm - Beige 17.0mm to 18.0mm - Brown 18.0mm to end (1 pieces)
- C3
Brown 0.0mm to 19.0mm - Beige 19.0mm to 20.0mm - Brown 20.0mm to end (4 pieces)
- A1
- B1
- C1
- D1
Brown 0.0mm to 22.0mm - Beige 22.0mm to 23.0mm - Brown 23.0mm to end (6 pieces)
- E1
- F1
- G1
- H1
- I1
- J1
Brown 0.0mm to 14.0mm - Beige 14.0mm to 15.0mm - Brown 15.0mm to end (1 pieces)
- L1
Brown 0.0mm to 13.0mm - Beige 13.0mm to 14.0mm - Brown 14.0mm to end (2 pieces)
- M1
- N1
Video
Here is a small video I made about it: https://www.youtube.com/watch?v=mMalvPH9m8g
blog comments powered by Disqus